Novastar VX1000_Box Video Processor

£2,702.00

The VX1000 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box.
VX1000 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch applications.

Novastar VX1000_Box Video Processor

The Novastar VX1000_Box Video Processor is a high-performance device that offers advanced processing capabilities for your LED display. With its powerful video scaling engine, the VX1000_Box can easily handle large-scale displays with high resolution and refresh rates. Its built-in HDR10 support ensures accurate color reproduction and contrast, while its user-friendly interface makes it easy to set up and configure. The VX1000_Box also supports multiple signal inputs, including HDMI, DVI, and VGA, allowing you to connect a wide range of devices. Plus, its compact design makes it easy to install and use in a variety of settings. Whether you’re creating immersive entertainment experiences or dynamic advertising displays, the Novastar VX1000_Box Video Processor is an excellent choice for your needs. Input connectors − 1x HDMI 1.4 (IN & LOOP) − 1x HDMI 1.4 − 1x DVI (IN & LOOP) − 1x DVI − 1x 3G-SDI (IN & LOOP) − 1x 10G optical fiber port (OPT1) Output connectors − 10x Gigabit Ethernet ports A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels. − 2x Fiber outputs OPT 1 copies the output on 10 Ethernet ports. OPT 2 copies or backs up the output on 10 Ethernet ports. − 1x HDMI 1.3 For monitoring or video output Self-adaptive OPT 1 for either video input or sending card output Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device. Audio input and output − Audio input accompanied with HDMI input source − Audio output via a multifunction card − Output volume adjustment supported Size: 483*351*50mm Weight: 6300G

Change History

Document Version Release Date Description
V1.3.1
2022-10-24
Optimized the descriptions of the DVI and HDMI connectors. Added descriptions for optical module selection.
V1.3.0
2022-07-30
Updated the rear panel picture.
V1.2.0
2022-02-18
  • Updated the certifications.
  • Added the Notes and Cautions section.
V1.1.0
2021-09-16
Updated the packaging descriptions
V1.0.0
2021-05-30
First release

Introduction

The VX1000 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. It features 10 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX1000 unit can drive up to 6.5 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels, respectively, which is ideal for ultra-wide and ultra-high LED screen applications.

The VX1000 is capable of receiving a variety of video signals and processing high-resolution 4K×1K@60Hz images. In addition, the device features stepless output scaling, low latency, 3D, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.

What’s more, the VX1000 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your in-field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.

Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX1000 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.

Certifications

CE, UL&CUL, IC, FCC, EAC, UKCA, KC, RCM, CB, RoHS

If the product does not have the relevant certifications required by the countries or regions where it is to be sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible for the legal risks caused or NovaStar has the right to claim compensation.

Features

  • Input connectors
    − 1x HDMI 1.4 (IN & LOOP)
    − 1x HDMI 1.4
    − 1x DVI (IN & LOOP)
    − 1x DVI
    − 1x 3G-SDI (IN & LOOP)
    − 1x 10G optical fiber port (OPT1)
  • Output connectors
    - 10x Gigabit Ethernet ports
    A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
    − 2x Fiber outputs
  • Output connectors
    - 10x Gigabit Ethernet ports
    A single device unit drives up to 6.5 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
    − 2x Fiber outputs
    OPT 1 copies the output on 10 Ethernet ports. OPT 2 copies or backs up the output on 10 Ethernet ports. 1x HDMI 1.3
    For monitoring or video output
  • Self-adaptive OPT 1 for either video input or sending card output
    Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
  • Audio input and output
    - Audio input accompanied with HDMI input source
    - Audio output via a multifunction card
    - Output volume adjustment supported
    - Backup between input sources
  • Low latency
    Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.
  • 3x layers
    - Adjustable layer size and position
    − Adjustable layer priority
  • Output synchronization
    An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.
  • Powerful video processing
    - Based on SuperView III image quality processing technologies to provide stepless output scaling.
    − One-click full screen display
    − Free input cropping
  • Easy preset saving and loading
    - Up to 10 user-defined presets supported
    − Load a preset by simply pressing one button
    − Free input cropping
  • Multiple kinds of hot backup
    - Backup between devices
    − Backup between Ethernet ports
    - Backup between input sources
  • Mosaic input source supported
    The mosaic source is composed of several input connectors of the same type.
  • Up to 4 units cascaded for image mosaic
  • Three working modes
    − Video Controller
    − Fiber Converter
    − Bypass
  • All-round color adjustment
    Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma
  • 3D function
    Work with the EMT200 3D emitter and matched 3D glasses to present a 3D visual experience.
  • Pixel level brightness and chroma calibration
    Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency, allowing for better image quality
  • Multiple operation modes
    Control the device as you wish via V-Can, NovaLCT or device front panel knob and buttons.

Appearance

Front Panel

front-Panel-vx-1000
No. Area Function
1
LCD screen
Display the device status, menus, submenus and messages.
2
Knob
  • Rotate the knob to select a menu item or adjust the parameter value.
  • Press the knob to confirm the setting or operation.
3
ESC button
Exit the current menu or cancel an operation.
4
Control area
  • Open or close a layer (main layer and PIP layers), and show the layer status. Status LEDs:
    − On (blue): The layer is opened.
    − Flashing (blue): The layer is being edited.
    − On (white): The layer is closed.
  • SCALE: A shortcut button for the full screen function. Press the button to make the layer of the lowest priority fill the entire screen. Status LEDs:
    − On (blue): Full screen scaling is turned on.
    − On (white): Full screen scaling is turned off.
5
Input source buttons
    Show the input source status and switch the layer input source. Status LEDs:
  • On (blue): An input source is accessed.
  • Flashing (blue): The input source is not accessed but used by the layer.
  • On (white): The input source is not accessed or the input source is abnormal.
  • Notes:
  • When a 4K video source is connected to OPT 1, OPT 1-1 has a signal but OPT 1-2 does not have a signal.
  • When two 2K video sources are connected to OPT 1, OPT 1-1 and OPT 1-2 both have a 2K signal.
1
Shortcut function buttons
  • PRESET: Access the preset settings menu.
  • TEST: Access the test pattern menu.
  • Freeze: Freeze the output image.
  • FN: A customizable button

Note:
Hold down the knob and ESC button simultaneously for 3s or longer to lock or unlock the front panel buttons

Rear Panel

Rear-Panel-vx-1000
Connector Qty Description
3G-SDI
1
  • ST-424 (3G), ST-292 (HD) and ST-259 (SD) standard video inputs supported
  • Max. input resolution: 1920×1080@60Hz
  • Deinterlacing processing supported
  • 3G-SDI loop output supported
  • DOES NOT support input resolution and bit depth settings.
HDMI 1.4
2
  • Max. input resolution: 3840×1080@60Hz or 3840×2160@30Hz
  • HDCP 1.4 compliant
  • Mosaic of two HDMI 1.4 inputs supported
  • Custom resolutions supported
  • − Max. width: 4092 pixels (4092×1136@60Hz) − Max. height: 3981 pixels (1060×3981@60Hz)
  • Loop output supported on HDMI 1.4 1
  • DOES NOT support interlaced signal inputs
DVI (HDMI 1.4)
2
  • Max. input resolution: 3840×1080@60Hz or 3840×2160@30Hz
  • HDCP 1.4 compliant
  • Custom resolutions supported
  • − Max. width: 4092 pixels (4092×1136@60Hz) − Max. height: 3981 pixels (1060×3981@60Hz)
  • Mosaic of two DVI inputs supported
  • Loop output supported on DVI 1
  • DOES NOT support interlaced signal inputs

Output Connectors

Connector Qty Description
Ethernet ports
10
    Gigabit Ethernet ports
  • Max. loading capacity: 6.5 million pixels
  • Max. width: 10,240 pixels
  • Max. height: 8192 pixels
  • Ethernet ports 1 and 2 support audio output. When you use a multifunction card to parse the audio, be sure to connect the card to Ethernet port 1 or 2. Status LEDs:
  • The top left one indicates the connection status.
    − On: The port is well connected.
    − Flashing: The port is not well connected, such as loose connection.
    − Off: The port is not connected.
  • The top right one indicates the communication status.
    − On: The Ethernet cable is short-circuited.
    − Flashing: The communication is good and data is being transmitted.
    − Off: No data transmission
HDMI 1.3
1
  • Support monitor and video output modes.
  • The output resolution is adjustable

Optical Fiber Ports

Connector Qty Description
OPT
1
    10G optical fiber ports
  • OPT 1: Self-adaptive, either for video input or for output
    − When the device is connected with a fiber converter, the port is used
    as an output connector. − When the device is connected with a video processor, the port is used
    as an input connector. − Max. capacity: 1x 4K×1K@60Hz or 2x 2K×1K@60Hz video inputs
  • OPT 2: For output only, with copy and backup modes OPT 2 copies or backs up the output on 10 Ethernet ports.
    Single mode OPT module description:
  • Hot swappable
  • Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s
  • Wavelength: 1310 nm
  • Transmission distance: 10 km
    OPT fiber selection:
  • Model: OS1/OS2
  • Transmission mode: Single-mode twin-core
  • Cable diameter: 9/125 μm
  • Connector type: LC
  • Insertion loss: ≤ 0.3 dB
  • Return loss: ≥ 45 dB
    Multi-mode OPT module description:
  • Hot swappable
  • Transmission rate: 9.95 Gbit/s to 11.3 Gbit/s
  • Wavelength: 850 nm
  • Transmission distance: 300 m
    OPT fiber selection:
  • Model: OM3/OM4
  • Transmission mode: Multi-mode twin-core
  • Cable diameter: 50/125 μm
  • Connector type: LC
  • Insertion loss: ≤ 0.2 dB
  • Return loss: ≥ 45 dB

Control Connectors

Connector Qty Description
ETHERNET
1
  • The top left one indicates the connection status.
    − On: The port is well connected.
    − Flashing: The port is not well connected, such as loose connection.
    − Off: The port is not connected.
  • The top right one indicates the communication status.
    − On: The Ethernet cable is short-circuited.
    − Flashing: The communication is good and data is being transmitted.
    − Off: No data transmission
USB
2
  • USB 2.0 (Type-B):
    − Connect to the control PC.
    − Input connector for device cascading
  • USB 2.0 (Type-A): Output connector for device cascading
GENLOCK IN-LOOP
1
    Connect to an external sync signal. Accepts bi-level and tri-level signals.
  • IN: Accept the sync signal.
  • LOOP: Loop the sync signal.

Note:
Only the main layer can use the mosaic source. When the main layer uses the mosaic source, PIP 1 and 2 cannot be
opened

Applications

Novastar-VX1000_Box-Video-Processor

Dimensions

The VX1000 provides the flight case or carton packaging. This section provides the dimensions of the device, flight
case and carton, respectively

Device

Novastar-VX1000_Box

Packaging

Flight Case

Specifications

Connector Qty Description
Electrical Parameters
Power connector
100–240V~, 1.6A, 50/60Hz
Rated power consumption
28 W
Operating Environment
Temperature
0°C to 45°C
Humidity
20% RH to 90% RH, non-condensing
Storage Environment
Temperature
–20°C to +70°C
Humidity
10% RH to 95% RH, non-condensing
Physical Specifications
Dimensions
483.6 mm × 351.2 mm × 50.1 mm
Net weight
4 kg
Packing Information
Accessories
    Flight Case
  • 1x Power cord
  • 1x HDMI to DVI cable
  • 1x USB cable
  • 1x Ethernet cable
  • 1x HDMI cable
  • 1x Quick Start Guide
  • 1x Certificate of Approval
  • 1x DAC cable
    Carton
  • 1x Power cord
  • 1x HDMI to DVI cable
  • 1x USB cable
  • 1x Ethernet cable
  • 1x HDMI cable
  • 1x Quick Start Guide
  • 1x Certificate of Approval
  • 1x Safety Manual
  • 1x Customer Letter
    Packing size
  • 521.0 mm ×517.0 mm ×102.0 mm
  • 565.0 mm ×175.0 mm ×450.0 m
    Gross weight
  • 10.4 kg
  • 6.8 kg
Noise Level ( typical at 25°C/77°F)
45 dB (A)

Brand

Novastar LED

NOVASTAR LED LOGO